A 3M Aura 9210+ N95. The 3M Auras are packaged flat before use; picture is of a 3M Aura after being fit to a face.

The 3M Aura is a line of disposable N95 respirators with a unique boat-style design produced by the 3M Company. Outside of the United States, 3M Auras are sold as FFP2 or FFP3 respirators.

3M Aura may have higher fit test pass rates than typical disposable N95 respirators; this means an individual wearing it may be more likely to have a correct fit in the absence of a formal fit test.

Individuals wearing 3M Auras while meeting in the Oval Office during the COVID-19 pandemic. Photo 2021-4-19, US government work (public domain).

In the United States, 3M appears to manufacture the following models of the Aura (as of 2021-8):

Discontinued 3M Aura models (incomplete list):

According to a trademark filing, the first use in commerce of "Aura" by 3M was in January of 2012, so that may be when the Aura line was first released (USPTO trademark serial # 85240142).

The 3M Aura design is reminiscent of the "boat-style" KF94 masks.

Fit test pass rate

The 3M Aura respirators appear to have a higher fit test pass rate than most traditional N95 designs (e.g. cup-style). This means that the average person putting on a 3M Aura may be more likely to achieve < 1% inward leakage (~ 99% effective filtration) when wearing the 3M Aura than with other N95 designs.

In a study in untrained individuals, the 3M Aura 1862+ had a fit test pass rate of 82.5%, whereas the typical N95 cup-style respirators had pass rates of 73%, 67%, and 23% (and the KN95 had a pass rate of 0%). In a small study of 60 anaesthetists, the 3M Aura 1870+ had a 5/5 (100%) pass rate, compared to a pass rate of 3/7 (43%) for the 3M 8210 (typical N95 cup style) and a pass rate of 1/9 (11%) for other typical N95 respirators.

In 2021, 3M conducted a study of fit test pass rates in their lab and found a 93% pass rate on the three common 3M Aura models. 3M chose study participants with a range of face shapes (NIOSH Bivariate panel).


Due to widespread demand from the COVID-19 pandemic and the popularity of the respirator series, the 3M Auras have been frequently counterfeit. On July 14th 2021, 3M issued a counterfeit alert, noting that millions of counterfeit 3M Auras had been seized; in this case, the 3M Aura 1870+.

The counterfeit 3M Auras often look nearly indistinguishable from the legitimate 3M products but fail to provide the protection of the genuine product. Aaron Collins, an individual with a background in aerosol science, performed a home quantitative fit test on a counterfeit 3M 1870+ and found it had a filtration efficiency of 94% on his test aerosol. In comparison, when he tested a (more likely) genuine 1870+ he found a filtration efficacy of 99.3%.


A 3M 9210+ modified to have earloops. The head straps were cut in the middle and pushed through mask cord locks.

Modifications to the respirator aren't recommended and will void NIOSH or other approvals. That being said, some find it useful to modify the 3M Auras for different purposes.

Reddit user electricpete converted his 3M 9205+ into an earloop-style mask "by cutting the loops in the center and then fastening the top and bottom ones together on each side with a silicone cord lock." (reddit comment)

Reddit user jackspratdodat created a guide to making a 3M Aura 9205+ into an earloop mask. This modification would be more comfortable with extended wear than the simple "cut and push through cord locks" method demonstrated in the previous paragraph.

See also